Peptide Storage Guide
Overview
Correct storage is the single biggest factor in keeping a research peptide intact. Lyophilized powder is very stable; once in solution, temperature, light and freeze-thaw cycles all matter. General guidance below is for laboratory research handling.
Introduction
Peptides are chemically and conformationally sensitive, so storage is the single biggest factor in keeping them intact. Poor storage leads to hydrolysis, oxidation, deamidation, aggregation or microbial growth — all of which compromise results. The guidance below covers temperature, moisture, light, freeze-thaw and shelf life for both powder and solution.
Temperature Requirements
| Condition | Temperature | Suitable for |
|---|---|---|
| Deep freeze | −80°C | Very long-term storage |
| Freezer | −20°C | Standard long-term storage |
| Refrigeration | 2–8°C | Short-term; reconstituted solutions |
| Ambient | 20–25°C | Brief handling only — not for storage |
| Peptide state | Temperature | Duration |
|---|---|---|
| Lyophilized (sealed) | −20°C | ~ 24 months |
| Lyophilized (opened, desiccated) | −20°C | ~ 12 months if resealed well |
| Reconstituted (multi-use) | 2–8°C | ~ 7–14 days |
| Working solution in syringe | 2–8°C | Hours (use promptly) |
Moisture Control
Lyophilized peptides are hygroscopic — atmospheric moisture causes caking, hydrolysis and microbial growth.
- Store with silica-gel desiccant in an airtight, sealed vial.
- Minimise vial openings; aliquot if a vial will be used repeatedly.
- Always let a vial reach room temperature before opening (prevents condensation), then reseal with fresh desiccant.
Light Protection
Some residues are photosensitive, so light exposure should be minimised — especially for the peptides that contain them.
| Residue | Light sensitivity |
|---|---|
| Tryptophan (W) | High — readily photo-oxidised |
| Tyrosine (Y) | Moderate |
| Cysteine (C) / Methionine (M) | Light-accelerated oxidation |
| Copper chromophore (GHK-Cu) | Moderate — store dark |
- Use amber vials or wrap clear vials in foil; store in opaque boxes.
- Handle under dim light; avoid direct sunlight and prolonged fluorescent exposure.
Freeze–Thaw Considerations
Repeated freeze-thaw cycles physically damage peptides (ice crystals, pH shifts, aggregation), with a typical activity loss per cycle. Aliquot to avoid it.
| Peptide type | After 1 cycle | After 3 cycles | After 5 cycles |
|---|---|---|---|
| Short (< 10 aa) | > 95% | ~ 90% | ~ 85% |
| Medium (10–30 aa) | > 90% | ~ 80% | ~ 70% |
| Long (> 30 aa) | > 85% | ~ 70% | ~ 55% |
| Cysteine-containing | > 85% | ~ 65% | ~ 45% |
- Do not freeze-thaw reconstituted solutions; keep them at 2–8°C.
- Divide powder into single-use aliquots before freezing; thaw gently (never heat).
Storage Containers
| Container | Notes |
|---|---|
| Type I borosilicate glass vial | Preferred — low reactivity, good barrier |
| Amber glass | Adds light protection |
| Low-binding plastic | Acceptable; watch for peptide adsorption with dilute solutions |
| Rubber-septum vials | Allow repeated access with minimal contamination |
Shelf-Life & QC
- Shelf life depends on temperature, moisture, light and sequence; lyophilized powder at −20°C commonly holds ≥ 24 months.
- Before use, visually inspect: reject any solution that is cloudy, discoloured or has particulates.
- Keep the Certificate of Analysis and lot number with your records; re-verify identity/purity for long-stored material.
Peptide-Specific Notes
| Peptide | Note |
|---|---|
| Methionine / cysteine peptides (Semax, Sermorelin, Humanin, AOD-9604) | Protect from oxidation; consider antioxidant, minimise air |
| Tryptophan peptides (GHRP-2, GHRP-6) | More light-sensitive — keep dark |
| GHK-Cu | Avoid EDTA/citrate and reducing agents; keep dark |
| Cerebrolysin | Pre-mixed ampoules: 15–25°C sealed, do not freeze |
For laboratory research use only. Not for human or veterinary use, diagnosis, or therapeutic application. Descriptions refer to published research contexts and are not medical or product claims.
Need research-grade peptides?
HPLC-verified, COA per batch. Tell us the quantity you need.
